DRM situation AFV bogged in factory

[Oberst Hausser]

In this situation a AFV has moved into factory and bogged, a terrible shame.

Due to the fact that the AFV is bogged thus not moving (stopped) what are its DRM other than a -1acq and +1 for BU ?

Its TH# under IF was a 3.

Thanks

 

[klasmalmstrom]

Who is shooting at who?

 

[ScottRomanowski]

You wrote "+1 for BU" so it must be the tank firing in the AFPh. First, a vehicle loses its acquisition when it leaves its present Location (C6.5, unless gyrostabilized). Second, like any vehicle which moved to a new hex, Case C applies. Third, you mentioned "IF"; C5.6 says Intensive Fire cannot be used during the AFPh. Fourth, Target Based DRMs apply as normal, and finally, there might be more Firer Based DRMs (e.g., Armor Leader).

 

[bendizoid]

Must assume the shot is in advancing fire phase, let’s see +4 entered a new hex, +1 BU, +2 factory hindrance, +1 factory TEM, +1 small sized target, total +9 so hits and leaves a aqui on snake-eyes with subsequent dr for improbable hit.

 

[Oberst Hausser]

You wrote "+1 for BU" so it must be the tank firing in the AFPh. First, a vehicle loses its acquisition when it leaves its present Location (C6.5, unless gyrostabilized). Second, like any vehicle which moved to a new hex, Case C applies. Third, you mentioned "IF"; C5.6 says Intensive Fire cannot be used during the AFPh. Fourth, Target Based DRMs apply as normal, and finally, there might be more Firer Based DRMs (e.g., Armor Leader).

OK so a gun can intensive fire but a an AFV gun cannot in the AFPh . Mmmmm - that's a catch!

 

[klasmalmstrom]

OK so a gun can intensive fire but a an AFV gun cannot in the AFPh . Mmmmm - that's a catch!

Only if the Gun was marked "Opportunity Fire" during the PFPh.

 

[ScottRomanowski]

As Klas wrote, because C5.6 says "Intensive Fire cannot be used during the AFPh except by an Opportunity Firer." and only Inf/Cav can be marked OppFire (A7.25).