Interior Factory Hex & OBA

Velocette

Member
Joined
Oct 25, 2016
Messages
130
Reaction score
21
Location
Heart of Dixie; nose in ASLRB
Country
llUnited States
Per B23.32, ..... if an Interior Building Hex is hit, only the rooftop AND highest level of that building hex are affected.

In this case the building is a Factory.

Is the Ground-level Location of a Interior Factory Hex immune to Indirect Fire (assuming it is not roofless).

Thanks,
Velo
 

STAVKA

Elder Member
Joined
Oct 20, 2004
Messages
516
Reaction score
229
Location
East Front
Country
llFinland
Per B23.32, ..... if an Interior Building Hex is hit, only the rooftop AND highest level of that building hex are affected.

In this case the building is a Factory.

Is the Ground-level Location of a Interior Factory Hex immune to Indirect Fire (assuming it is not roofless).

Thanks,
Velo
Yes it is affected, the highest level of a factory hex is the Ground Level Location.
 

Simon62

Member
Joined
Jul 9, 2019
Messages
146
Reaction score
22
Country
llUnited Kingdom
Hi what happens to smoke in this situation - the smoke effects the ground level of the interior factory and is 2 levels high, the roof is at level 2.5.

does the smoke rise inside the factory to 1/2 level below the roof then start again at the roof level raising another 2 levels?
 

Tater

Elder Member
Joined
Oct 25, 2003
Messages
9,725
Reaction score
555
Location
Ardmore, TN
Country
llUnited States
Yes it is affected, the highest level of a factory hex is the Ground Level Location.
Why couldn't the roof location and the highest level be one in the same. The rule doesn't actually make them mutually exclusive.
 
Top