Perry
Forum Guru
The broken Morale Level of the Russian Assault Engineers in Twilight Of The Reich should be 8, not 9 as shown on the counter. Expect to see replacement counters in the next boxed product or two.
Only the AE.Before I take my permanent marker to them, is it only the Assault Engineer squads that have the wrong broken morale?
BTW, this is the best kind of errata to have: 9s to 8s. (8s to 9s is a bear.)
Slaughter at Ponyri will have Russian AEs. They won't be 'replacement' counters, though.Yes, with the purchase of a $150 module.![]()
I guess I overlooked those in my storage box, went immediately to the new counter sheets. When I saw the I.D. letters of the 3 on the counter sheet of A, B, and C, I just assumed they were the first release.Suggest: Use Axis Minor from AoO.
Hmmm, is that correct? If there is no other verbiage in the SSR, then I was of the understanding that the "1" designation on the overlay was pointed along the "1" hexside direction, which is the design intent here for placement purposes.ASL scenario 292 has overlay X38, but only specifies 18aJ5 as hex to place the overlay.
While it is a one hex overlay, a second hex (ie J4 or J5) is required to orient the wall facing.
Thanks,
Rich
Yes, thus I could figure out the second hex required by VASL for x38.Hmmm, is that correct? If there is no other verbiage in the SSR, then I was of the understanding that the "1" designation on the overlay was pointed along the "1" hexside direction, which is the design intent here for placement purposes.
Bill
A2.73:Hmmm, is that correct? If there is no other verbiage in the SSR, then I was of the understanding that the "1" designation on the overlay was pointed along the "1" hexside direction, which is the design intent here for placement purposes.
Rich,Yes, thus I could figure out the second hex required by VASL for x38.
VASL probably should not require the second hex, no big deal.
It would be the hexside one off the "1" sniper hexside should the sniper be pointed North.
Thanks,
Rich
Good luck with that.I am trying to build a better working relationship with Tom Repetti