Overlays FT2, FT3, FT4

Joined
Jul 8, 2004
Messages
215
Reaction score
46
Location
Saint-Brieuc, France
Country
llFrance
overlay FT2 in LFT6 ("Alcazar de Toledo")
overlay FT3 in LFT7 (cluster of wooden buildings)
overlay FT4 in FTC1 (level 4 hill hexes covering board 9 multi-hex building)
 

hoxson1

Member
Joined
Jun 23, 2016
Messages
221
Reaction score
81
Location
San Diego
Country
llUnited States
yes, those are them. Just need a view of them so I can fudge up a map view for the scenarios on the Archive.
Thanks very much.
 

morgan kane

Member
Joined
Jun 23, 2010
Messages
139
Reaction score
13
Location
Stockholm, Sweden
Country
llSweden
The original FT2 overlay from LFT6 has a mixture of white and red stairwell symbols. Was there any reason for this?

Planning to play the scenario where this overlay is used, FT22, El Alcazar de Toledo. The defenders are "Mixed Nationalist elements". Are they Regular Army (if they are the defenders will not use no quarter)?

Finally looking at the SCW SW chart. The LMG used by the Nationalists is supposed to be a 2-6 with a B11, not the standard British 2-7 with a B12, but in FT23, Not One Inch, the LMG used by the Nat. is the standard British LMG. Is this an error?
 
Last edited:
Top