Oberst Hausser
Member
RO LOS study:
Without further adieu let's look:
Q28 - G28 10 hexes
2.5 1 ( the roof)
The difference is 1.5 hexes ( vertical)
This seems to be 1(building) + 2 (range) = 3 hex blind-spot , with -1 per >1 elevation difference.
This means every rubble hex shown to the L of the LOS is blind. Were it to pass over a like building.
This would remain identical until 15 hex range.
Same situation. HOWEVER due to range <10 there is now only 1 hex blind behind ie D23,D24, D25 can be attacked.
Now to the difference between 2nd level buildings.
If we take LOS form level 2 Q27 ( yellow counter) there is just a 1 level difference between H26.
What are the LOS calculations for this ? 1 or 2 hexes ?
Lastly,
Is there a LOS here? ( Both on roof).
Thanks,
Without further adieu let's look:
Q28 - G28 10 hexes
2.5 1 ( the roof)
The difference is 1.5 hexes ( vertical)
This seems to be 1(building) + 2 (range) = 3 hex blind-spot , with -1 per >1 elevation difference.
This means every rubble hex shown to the L of the LOS is blind. Were it to pass over a like building.
This would remain identical until 15 hex range.
Same situation. HOWEVER due to range <10 there is now only 1 hex blind behind ie D23,D24, D25 can be attacked.
Now to the difference between 2nd level buildings.
If we take LOS form level 2 Q27 ( yellow counter) there is just a 1 level difference between H26.
What are the LOS calculations for this ? 1 or 2 hexes ?
Lastly,
Is there a LOS here? ( Both on roof).
Thanks,