Fire from rooftop to Factory floor

_Fury_

Member
Joined
Jul 30, 2005
Messages
106
Reaction score
13
Location
US West Coast
Country
llUnited States
Hi All,

Unit on a stone factory rooftop (L2.5) fires IFP within same hex to factory floor. This is PBF and what is the TEM? 0, +1 or +3?

Thanks!
 

A_T_Great

Member
Joined
Oct 15, 2011
Messages
198
Reaction score
81
Location
Maine
Country
llUnited States
Hi All,

Unit on a stone factory rooftop (L2.5) fires IFP within same hex to factory floor. This is PBF and what is the TEM? 0, +1 or +3?

Thanks!
It would be +1 It is not spelled out in the rules, but that is what is given in the example after B23.743
 

Eagle4ty

Elder Member
Joined
Nov 7, 2007
Messages
3,435
Reaction score
1,160
Location
Eau Claire, Wi
Country
llUnited States
It would be +1 It is not spelled out in the rules, but that is what is given in the example after B23.743
The example does not spell that out, as what it implies is that because C6 is rubbled a clear LOS exists to the 4-6-7 with no Factory hindrance due to the height differences between the target and the firer. Because a firer on a roof is outside the building, any fire directed by it to a unit at ground level in the same hex would incur the Building TEM the same as if it were in a multi-level building at a higher elevation firing down a stairwell at a unit beneath it.
 

A_T_Great

Member
Joined
Oct 15, 2011
Messages
198
Reaction score
81
Location
Maine
Country
llUnited States
The example does not spell that out, as what it implies is that because C6 is rubbled a clear LOS exists to the 4-6-7 with no Factory hindrance due to the height differences between the target and the firer. Because a firer on a roof is outside the building, any fire directed by it to a unit at ground level in the same hex would incur the Building TEM the same as if it were in a multi-level building at a higher elevation firing down a stairwell at a unit beneath it.
You're right I missed the rubble counter.
 

klasmalmstrom

Forum Guru
Joined
Feb 26, 2003
Messages
15,672
Reaction score
2,239
Location
Sweden
Country
llSweden
Unit on a stone factory rooftop (L2.5) fires IFP within same hex to factory floor. This is PBF and what is the TEM? 0, +1 or +3?
Factory TEM applies to such an attack.

B23.88:
"...A unit at rooftop level in a Factory Rooftop Access Point being attacked by a same-hex ground-level unit receives Height Advantage +1 TEM (23.81), while the ground-level unit receives Factory TEM (and no additional TEM for a Fortified Building Location) if attacked by that Rooftop unit. Both units may use PBF (since they are ADJACENT; A7.21)."
 

mgmasl

Senior Member
Joined
Feb 26, 2006
Messages
3,892
Reaction score
187
Location
Cadiz
Country
llSpain
Is posible any fire betwen rooftop and ground level locations in the same hex if not in a Factory Rooftop acces point? I supposed no fire posible betwen diff levels if not staircase
 

klasmalmstrom

Forum Guru
Joined
Feb 26, 2003
Messages
15,672
Reaction score
2,239
Location
Sweden
Country
llSweden
Is posible any fire betwen rooftop and ground level locations in the same hex if not in a Factory Rooftop acces point? I supposed no fire posible betwen diff levels if not staircase
Correct, you need a stairwell - otherwise there is no LOS.
 
Top