EmRR Truck Movement

johnl

Senior Member
Joined
Oct 23, 2010
Messages
697
Reaction score
472
Location
SoCal/Oregon
Country
llUnited States
Sirs and (possibly, but not likely) Ladies:

Consider moving a truck from Y3 to Y4. The RR Movement Point Chart for EmRR sez crossing a RR hexside not using a RR Crossing is 6MP+COT. Is the COT for a vehicle moving onto a Hillock (1MP F6.3) included in the 6MP so the COT would be (a) 1MP [OG] for 7MP total or, (b) 2MP [moving onto Hamada] + [OG] for 8MP total?
9492
 

klasmalmstrom

Forum Guru
Joined
Feb 26, 2003
Messages
19,778
Reaction score
7,201
Location
Sweden
Country
llSweden
I think the COT would be what a truck pays to enter an Open Ground hillock hex. Which would be 1 MP (up a Hillock) +4 MP (Open Ground). So the total would be 5 (COT) + 6 = 11 MP.

But when entering tom Y3, why not use the road/crossing?
 

johnl

Senior Member
Joined
Oct 23, 2010
Messages
697
Reaction score
472
Location
SoCal/Oregon
Country
llUnited States
I think the COT would be what a truck pays to enter an Open Ground hillock hex. Which would be 1 MP (up a Hillock) +4 MP (Open Ground). So the total would be 5 (COT) + 6 = 11 MP.

But when entering tom Y3, why not use the road/crossing?
Hmm. Because I'm turning to stay on the RR....but I guess the rule is for 'entry' not 'entry and exit' ..duh :p. and, yes, truck moving in OG is 4MP..I knew that :whistle:

Thanks, Klas
 
Top