Simon62
Member
- Joined
- Jul 9, 2019
- Messages
- 479
- Reaction score
- 65
- Country
Hi all,
I have a half squad engineer with a DC in a cellar and in an adjacent hex a full engineer squad (both German) at ground floor and we are playing red barricades.
The full German engineer squad places smoke in the grd floor of the hex containing the half squad engineer (assuming it rolls < = 5 on its smoke placement) and then the half squad engineer moves upstairs from cellar to ground level (2MF's, because of smoke) then declares CX and places a DC in an adjacent hex containing a Russian unit (3mf's - 2 for placement into adjacent building + 1 for smoke).
My questions are:
I have a half squad engineer with a DC in a cellar and in an adjacent hex a full engineer squad (both German) at ground floor and we are playing red barricades.
The full German engineer squad places smoke in the grd floor of the hex containing the half squad engineer (assuming it rolls < = 5 on its smoke placement) and then the half squad engineer moves upstairs from cellar to ground level (2MF's, because of smoke) then declares CX and places a DC in an adjacent hex containing a Russian unit (3mf's - 2 for placement into adjacent building + 1 for smoke).
My questions are:
- Are we correct for Adding 1mf for smoke to place the DC - we did this because the rules state that the placement MF's are expended in the placers hex not the target hex.
- If the half squad was accompanied by a leader, I assume this would be classed as assault movement (only 1 location changed and not all movement factors used and CX would not need to be declared)