A Question about FrF67 Collecchio

[hongkongwargamer]

Monsieurs, une question, s'il vous plaît ..

SSR2 says "Printed stairwell do not exist".

However hex 51M10 has a Steeple. B31.2 stays Steeple has an inherent stairwell. Am I correct in thinking that since this is a multihex building and therefore it has Level 0 and Level 1. The Steeple's at Level 2?

Obrigado ..

 

[von Marwitz]

Looky here:

GRENADIER´17 ASL Tournament, Germany, 01.11.-05.11.2017

Finally here it is...The GRENADIER´17 thread ( Thanks to Herr von Marwitz for the heads up ) Visit www.aslgermany.de for details

www.gamesquad.com

Both an erratum and clarifications can be found on the Friendly Fire website for FtF67 "Collecchio":

ERRATA:
SSR 3 says "A +1 Dusk LV Hindrance equal to Mist (E3.32) is in effect". Delete "+1".

CLARIFICATIONS:
The scenario card specifies that only hexes west of the river are in play. There are pair of hexes such that LOS between them cross hexes that are not in play. Are such LOS blocked because of crossing such out-of-play hexes?
Answer: No.

Per SSR 2, Printed stairwells do not exist. Which of the large round center dot (B31.3), the white square (B23.23) or the white cross (Steeple; B31.2) are considered Printed stairwells?
Answer: Only the white square is a Printed stairwell.


von Marwitz

 

[hongkongwargamer]

Looky here:

GRENADIER´17 ASL Tournament, Germany, 01.11.-05.11.2017

Finally here it is...The GRENADIER´17 thread ( Thanks to Herr von Marwitz for the heads up ) Visit www.aslgermany.de for details

www.gamesquad.com

Both an erratum and clarifications can be found on the Friendly Fire website for FtF67 "Collecchio":

ERRATA:
SSR 3 says "A +1 Dusk LV Hindrance equal to Mist (E3.32) is in effect". Delete "+1".

CLARIFICATIONS:
The scenario card specifies that only hexes west of the river are in play. There are pair of hexes such that LOS between them cross hexes that are not in play. Are such LOS blocked because of crossing such out-of-play hexes?
Answer: No.

Per SSR 2, Printed stairwells do not exist. Which of the large round center dot (B31.3), the white square (B23.23) or the white cross (Steeple; B31.2) are considered Printed stairwells?
Answer: Only the white square is a Printed stairwell.


von Marwitz

Yeah mate, I should have checked that first. Danke!

 

[Will Fleming]

Ufft. VASL gets rid of the white circles (single hex, level 1.5 buildings), but keeps the stairwells.

 

[von Marwitz]

Ufft. VASL gets rid of the white circles (single hex, level 1.5 buildings), but keeps the stairwells.

You can solve that VASL problem by selecting the option getting rid of all stairwells (ground level only) and then placing a draggable Steeple overlay and a draggable big white circle for a single-hex 1.5 level building IIRC.

Besides:
Look on the vasl.info website in the download-section. There should be a complete setup for FrF67 Collecchio made with (probably) VASL v6.3.3.

von Marwitz